What is the principle of automatic inflatable pads in the field? Why does it inflate automatically?
Outdoor automatic inflatable automatic inflatable mattress principle (forward)
The principle of automatic inflation of automatic inflatable products is to close the open air chamber to a waterproof nylon shell and expand automatically when it is used. That is: opening the air valve and springback of the stuffing like the sea surface makes the air cushion absorb the air; after closing the valve, the air is enclosed in the air cushion. The automatic inflatable pad is convenient and comfortable. Once the inflatable pad is filled, you can adjust the soft and hard level by controlling the intake volume.
The stick and the manufacturing process, to prevent the sliding bubble, to bring you more comfortable sleep feeling and moisture-proof pad from top to bottom with uniformly distributed pores, more suitable for human engineering, make the user more comfortable when lying down, lift the day after Laughton's outdoor exhaustion.
1. First use:
1) open air cushion
2) open the air nozzle and make the air cushion bed expand automatically. Turn off the air nozzle, fold the air cushion bed repeatedly, then press several forces, and then open the valve to allow the air cushion bed to expand automatically, so that it can fully restore the elasticity and shape.
2. The method of inflating:
1) open air cushion, open air mouth, air cushion bed will start to expand automatically.
2) please wait until the air cushion bed is expanded, and then tighten the lid.
3) adjust the air pressure and adjust the hardness of its comfort.
Note: if it is kept in the curled state for a long time (not recommended), use the mouth several times to inflate it to restore elasticity.
3. The method of exhausting:
1) open the air mouth, roll up from the other end of the gas nozzle, and press out the air.
2) turn off the air nozzle, roll up the air cushion bed from the other end, and open the air mouth again to discharge the remaining air.
3) closing the valve at last, can be kept at any time at any time.
Attention: when carrying, please place the bag in the bag to avoid scratching.
4. The safekeeping method:
Open air, open the gas nozzle, kept in a cool dry place (for example: on the back of a bed or sofa), because the air cushion bed sponge shape memory, can be quickly expanded into the most commonly used shape.
5. Repair methods:
1) confirm where the leak is: blow up and close the valve after expansion, moisten the surface with water or thin soapy water, fold it in half, press it on the knees and press it with body weight. The place where bubbles start is a leak area. Please mark it.
2) small hole repair: the air cushion bed completely dry, vent air, drop on the hole in the next agent. Because the air is finished, the next agent will be inhaled to seal the hole. Then the next agent is hardened.
3) big damage repair: air cushion bed is completely dry and deflated, glued on patch cloth, and air cushion surface is also coated with glue on the surface of the air cushion. It can be dried for 30 seconds to 3 minutes (depending on the temperature). It fits to the damaged place and flatten for 4 hours.
6. Clean:
The air cushion bed expands to the maximum limit, tightly closes the valve, uses the soft brush and the low stimulation family degreasing cleanser or lotion, washes in the bathtub and scours with the water thoroughly, after completely dry, saves.
7. Note:
1) not close to sharp things (plants have thorns or stone or blade).
2) do not use tents, bedding cloth in the air bed below please.
3) please do not use it as a float.
4) stay away from flames or sparks.
5) when the temperature is high, do not put the air cushion bed with the expansion and closing the valve in the car or tent.
6) do not be contaminated with sunscreen or alkaline drugs.
7) do not spend a long time sunning in the sun, the ultraviolet light will let the surface of the material slowly damage.
8) please put it in a place where pets can't touch.
9) the gas nozzle is hard, and should be avoided at rest.
